Features
Bridging the gap between desktop and bookshelf speaker, YU3 makes no compromises with 30W per side of built-in Class D amplifier power giving crystal clear sound. 4” Kevlar® drivers and 1” silk tweeters provide distortion-free sound fed by YU3’s impressive input section. Featuring the same inputs as the larger YU5, two optical Toslink inputs, integrated Bluetooth™ 4.0 for wireless streaming, an RCA port and a 3.5mm AUX jack input, YU3 is ready for anything. Easily add a subwoofer to your system with the sub-out port, and ensure your mobile devices are always ready to go with the USB charging port.
Silk Dome Tweeters
YU3 features 1” silk dome tweeters to deliver clear crisp highs. Scintillating sound.
Kevlar Drivers
The 4” Kevlar® drivers provide well-balanced mid-range and bass tones for overall sound quality that faithfully reproduces your favorite music.
Control Knob
YU3 has a 1.5” rear bass port that has been carefully designed and tuned to eliminate port turbulence while extending bass response.
Remote Control
The Kanto remote control gives you input, volume, and tone control, and allows you to control your connected Bluetooth™ device. You can also trigger USB charging when the speaker is in standby mode.
Inputs & Outputs
YU3 features five input choices, including two optical inputs and Bluetooth™ 4.0 (supports aptX CODEC). If you are looking for more low-end, connect a powered subwoofer to the SUB OUT port.
Rear Bass Port
YU3 has a 1.5” rear bass port that has been carefully designed and tuned to eliminate port turbulence while extending bass response.
Knurled Binding Posts
The speaker connection from Active (LEFT) to Passive (RIGHT) uses high quality knurled binding posts. This standardized wiring system allows you to trim the included premium speaker wire to the desired length or purchase longer lengths for more versatility.
What's in the Box?
YU3 comes complete with remote control, power cord, speaker wire and an RCA – mini-jack adapter that you can use to adapt for either input. The package also includes batteries, manuals, and rubber feet.
Shipping Note: Shipping to Alaska and Hawaii is not available for this item
A physical address is required for delivery. No Military or PO Box shipments available
Warranty: 2 Year Kanto
Specs
General
- Tweeters: 1 inch Silk Dome
- Woofers: 4 inch Kevlar®
- Remote: Included
Audio
- Amplifier Type: Class D
- Nominal Impedance: 4 Ohm
- Sensitivity 2.83V (/1W/1m): 85 dB
- Total Harmonic Distortion: < 0.3%
- Frequency Response: 60 Hz – 20 kHz
- Crossover System: 2-way
- Crossover Frequency: 2.0 kHz
Inputs and Outputs
- Inputs: 1 x 3.5mm mini-jack AUX | 1 x RCA L/R | 2 x Optical (Toslink) | 1 x Bluetooth™
- Outputs: 1 x Subwoofer | 1 x USB Charge 5V 1A
- Speaker Terminals: Left and Right Binding Posts
- Input Sensitivity: 550 mV
Power
- Power Output: 30 Watts RMS per channel
- Input Voltage / Frequency: AC 110V – 220V 50/60 Hz (auto switching)
- Standby Power Consumption: < 0.5 W
Weights and Measurements
- Dimensions (each speaker): 5.5” W x 7.5” D x 8.7” H (14 x 19.1 x 22.1 cm)
- Net Weight (active): 6.8 lbs (3.1 kg)
- Net Weight (passive): 5.2 lbs (2.4 kg)
- Gross Weight: 16.1 lbs (7.3 kg) (boxed pair)
- Shipping Box Dimensions: 16.3″ x 11.9″ x 11″ (41.3 x 30.3 x 28 cm)
In the box:
- Kanto YU3 Powered Desktop Speakers (Pair) with Bluetooth - Gloss Teal
- Remote with batteries
- Power cord
- Speaker Wire
- RCA – Mini Jack Adapter
- Rubber feet
Specs
General
- Tweeters: 1 inch Silk Dome
- Woofers: 4 inch Kevlar®
- Remote: Included
Audio
- Amplifier Type: Class D
- Nominal Impedance: 4 Ohm
- Sensitivity 2.83V (/1W/1m): 85 dB
- Total Harmonic Distortion: < 0.3%
- Frequency Response: 60 Hz – 20 kHz
- Crossover System: 2-way
- Crossover Frequency: 2.0 kHz
Inputs and Outputs
- Inputs: 1 x 3.5mm mini-jack AUX | 1 x RCA L/R | 2 x Optical (Toslink) | 1 x Bluetooth™
- Outputs: 1 x Subwoofer | 1 x USB Charge 5V 1A
- Speaker Terminals: Left and Right Binding Posts
- Input Sensitivity: 550 mV
Power
- Power Output: 30 Watts RMS per channel
- Input Voltage / Frequency: AC 110V – 220V 50/60 Hz (auto switching)
- Standby Power Consumption: < 0.5 W
Weights and Measurements
- Dimensions (each speaker): 5.5” W x 7.5” D x 8.7” H (14 x 19.1 x 22.1 cm)
- Net Weight (active): 6.8 lbs (3.1 kg)
- Net Weight (passive): 5.2 lbs (2.4 kg)
- Gross Weight: 16.1 lbs (7.3 kg) (boxed pair)
- Shipping Box Dimensions: 16.3″ x 11.9″ x 11″ (41.3 x 30.3 x 28 cm)
In the box:
- Kanto YU3 Powered Desktop Speakers (Pair) with Bluetooth - Gloss Teal
- Remote with batteries
- Power cord
- Speaker Wire
- RCA – Mini Jack Adapter
- Rubber feet
Sales Stats
- Speed to First Woot:
- 5d 14h 22m 49.880s
Purchaser Experience
Purchaser Seniority
Quantity Breakdown
Percentage of Sales Per Hour
12 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
---|
Percentage of Sales Per Day
Mon | Tue | Wed | Thu | Fri | Sat | Sun |
---|