Logitech G Extreme 3D Pro USB Joystick

So yes, this is cheap and it will work. There is one major caveat. If you are using this for rudder, be prepared to hate life. The twist on this stick has a slight loose spot around center. This doesn't sound terrible, and for most flight sticks it probably wouldn't be. However, the loose direction is all in one direction, so your rudder will constantly pull in one direction unless you counter. I took it apart and fixed this by putting wire shielding around the part of the spring that operates the rudder. It still is loose but it at least springs back to center now. This is not a unique problem to me. Searching google and tons of people who actually know what to look for run into this. If you're handy, buy this and fix it. If you use separate rudder controls, you can lock the twist on this, which is a nice feature. In that case you should also buy this. If you want to use this for rudder and have no tinkering ability, I would pass on this. It's too bad as well because otherwise it's a nice stick. Be aware, the twist action (rudder) is super sensitive on this stick. I have no idea why. It's in the firmware as well. You will hit full rudder lock long before hitting full twist. The sensors also clip in the corners of the joystick, so either this is a round sensor that is over large, or a square one that is over small. Not sure which. This isn't an issue though, it performs fine, it would just have been nice if there was no clipping on the sensor at extreme angles. For the price though you can't complain. That's why I'm really only complaining about the rudder because they could fix that for free essentially if they bothered to take even half a second to investigate it. Another common complaint is that it's not smooth where your palm rests on the stick. My unit was smooth, but taking it apart I saw a clip on the underside of the rest that needs to be unclipped to take it apart. If this is not cliped from factory this could cause what people are reporting. Just push the clip on, which anyone can do in literally one second, and it should solve this issue if you have it. I hope this review helps.