Cooler Master High Performance Thermal Paste

The Cooler Master High Performance Thermal Paste is a very good quality thermal paste to use. Although there is not much to talk about when it comes to thermal paste, I'll try to review it as best as I can. Usability: So it comes in a nice syringe-style thing (like most thermal pastes) that helps easily squirt it and cover the area you are putting it on. Not much else to say here, besides that it is easily usable. Package: Inside the packaging, there were two templates that helped you put the thermal paste on so you wouldn't get it on anything, and so it is spread evenly and thoroughly. This is very helpful and somewhat unexpected, but it really helped to put it on. Performance: This is the main part. After applying it, I put it on and decided to go for a test drive. Previously, I was getting normal temps of about 60 degrees C, which is insanely high for normal computer usage, while in games, it would go over 100 degrees and actually cause it to shut itself down. Obviously it was overheating, so I decided to try reapplying thermal paste. I went with this one after a recommendation, and after trying it, it was so much better. I went down to high 30s low 40s even during games, and my computer was much more reliable now. I can definitely use it much better without worrying about the temps, and I can tell you that it is a load off of my mind. There were no problems with it whatsoever, and there is still more than half left in the syringe so if I even need it again years from now, I'll have more handy. To apply it, I used a Q-Tip, and just spread it around until it was completely covered, and just pasted it on. Worked like a charm! Hopefully this review helped, and happy shopping!