MSI 32" UHD Monitor | MAG 323UPF
$349.99
$499.99
30% off
Reference Price
Condition: Factory Reconditioned
Model: MAG 323UPF
Screen Size: 32"
Top positive review
86 people found this helpful
32 inches, Rapid IPS, KVM, Adaptive Sync, & High 4K Refresh Rate
By Robert W Pritchett on Reviewed in the United States on November 10, 2023
Firstly, at the time of this writing, the Amazon description still says the screen is 27” diagonal. This is incorrect. The screen is actually 32”. I chose this monitor primarily for the KVM function. I wanted a large monitor >30” to serve dual duty with a personal desktop and work laptop. Initially, I was leaning towards one of the 34” OLED ultrawide models with KVM (like MSI’s own MEG 342C) due to the outstanding visual quality only OLED panels have. However after going to a local brick-and-mortar store to look at OLED options in person, I saw first-hand undesirable image retention and the start of burn in on the display units. I decided to go with an IPS panel so I don’t need to have burn in worries or the hassle of frequent OLED panel/pixel maintenance or popups. Also, I found the clarity of text on the OLED panels was not as clear and I needed a monitor that could be used for work (lot’s of text). And finally, I decided I wanted the extra vertical real estate of a 16:9 rather than the ultrawide 21:9. For setup, everything is very straightforward, but the assembly does require a screwdriver to fasten two screws to secure the stand. The power cord is thick with a D-shaped power plug like what goes to the computer’s PSU – no power brick. There’s one full-size DisplayPort 1.4a, two full-size HDMI 2.1, one Type-C DP alternative with power delivery for computer #1, USB-B port for computer #2, and three USB-A hub ports for shared peripherals to be shared between computers #1 and #2. Upon setup, I found G-Sync was automatically detected and enabled on the desktop. I usually have to tinker with monitor settings to get a picture I like, but I didn’t have to touch a thing on this monitor. Out of the box it looks good with no dead or stuck pixels. With all that said, here is the TL;DR: --PROS-- -The monitor has both swivel and height adjustments -Response time is 1ms and 4K 160Hz should be plenty of FPS headroom if you want to game and have the hardware -Stand is heavy and solid; plus it doesn’t take up much desk space unlike the v-shaped stands common to gaming monitors. -No RGB or flashy lights. The power and standby LEDs are subtle. Neither is that annoying blue that is too common. Power is soft white and standby is a steady orange glow. -Great picture, crystal clear text, bright -KVM switches automatically; no need to push a button or go into a menu. When desktop powers on, the display and USB ports are usable. When a laptop is connected via USB-C, it switches everything over. -Power delivery is 90W, plenty to keep a laptop charged and not a stingy 15W or 18W like others (I’m looking at you Gigabyte) -Windows recognizes HDR and will enable HDR 10-bit -HDMI 2.1 means console players can use this monitor to play 4k 120Hz --Cons-- -A USB-C cable is not included with the monitor, only DisplayPort and HDMI cables. Furthermore, you need to be very careful when selecting a USB-C cable to use since not all are equal. What you want is one that says it can do 40Gbps, rated USB-C 4 or Thunderbolt 3/4 and be capable of 100W-240W power delivery. A lot of data needs to go upstream and downstream on this cable and the cheap ones won’t do it. A proper cable will typically be priced $30-$40 for a short 3.3ft one. Don’t cheap out on the cable! -USB-C power delivery is turned off by default. You must toggle it on in the monitor settings.
Top critical review
3 people found this helpful
Among my worst experiences in years.
By Joseph on Reviewed in the United States on December 13, 2024
Buying this monitor from has been among my worst experiences in many years. The unboxing was neither excellent nor too bad. I had downloaded the user manual PDF from the link in the listing and referred to it a couple of times. It took up a lot of floor space in my spare bedroom. One thing the user manual didn't explain that it ought to is that you probably want to plug in all the cables you expect to use after installing the mount, but BEFORE setting the monitor in place because it might be EXTREMELY difficult to access the sockets after it's set in place. It shows that the important ones are underneath, but you need to recognize how severe the implications of that might be for you. I got the cables I wanted to use plugged in, set the monitor in place, routed the cables, and got the other ends all plugged in. I turned it on, and the screen was only all white. Trying to access the OSD menu didn't change the display - no menu appeared. Nothing. I installed and tried MSI's monitor software. It's kinda kludgey. They put a lot more effort into making it looking very purpley than they did into making the user interface good and the sw work well. It saw the monitor connected (and sometimes suddenly didn't), but nothing I did in it changed the monitor from all white, except when I selected an unused connection type and it went into standby, disconnecting the keyboard and mouse I tried connecting through the monitor. After that, I put my keyboard and mouse back on a hub connected directly to my computer. You need to understand carefully that the downstream USB ports are completely disconnected when the monitor is in standby or off. The screen was always only: all white, or all grey, or all black. I have another HDMI monitor here, so with a LOT of time and effort wrangling the cables into various different configurations than I had intended if the monitor had just worked, I was able to eliminate everything else as being the problem. Keep in mind the sockets on the monitor are extremely difficult to plug into when I have it set in place. It's especially problematic when the monitor is situated right in front of a wall if you don't have room to manipulate it around to get to the bottom. My brand new MSI MPG321UR QD 32" Gaming Monitor was in fact: DOA. Amazon.com vendor is out of stock so they won't provide a replacement. Amazon support was unwilling to provide a resolution to the ACTUAL problem that if I reorder from a different vendor, even with an adjusted price, it won't be financed by Amazon.com, which was a critical factor in me selecting THIS monitor. If I had my druthers, I would have selected some different monitor, but this appeared to be my best choice that could be financed by Amazon during the Black Friday deals, best deals of the year. I talked to a real friendly guy in MSI tech support. He said that the best MSI could do is replace it with a refurbished unit, but he was empathetic with the fact that a person doesn't go through all the effort to select, buy, and pay for a new monitor to only end up with a refurbished monitor. They don't carry new stock to replace DOAs with. Having selected this monitor has resulted in me having NO new good monitor sold, financed, and shipped by Amazon at the best sales prices of the year (Black Friday/Cyber Monday). Buyer beware - if you're like me, it turns out that it's a dice roll since you can do everything under your control correctly and end up back where you started, but having lost huge opportunity cost. I expected better by selecting this monitor, and I was sorely disappointed. Even if you're a little different than me, you too might be sorely disappointed if you select this monitor.
Sort by:
Filter by:
Sorry, no reviews match your current selections.
Try clearing or changing some filters.Show all reviews
Show more reviews